Colt King Cobra 22: A Snake You Want On The Trail

A compact revolver chambered in .22 LR may not be the ideal tool for some tasks, but it does many of them well. A lightweight, reliable, and low-recoiling setup like this can be used in roles ranging from training to personal defense to small game hunting, and probably a few more that are not necessarily front of mind. Any .22 revolver can fit that niche, but one that ticks a few more necessary boxes is the Colt King Cobra 22 revolver series. Here is the rundown on what the Colt King Cobra 22 is and how well it puts holes in things.

Thank you for reading this post, don't forget to follow and signup for notifications!

At that compact size in an all-stainless steel frame, it is a bit small for a .357 Magnum, but the perfect candidate for a stable shooting iron in .22 Long Rifle. That was realized with the Colt King Cobra Target released in 2022. These revolvers wear 4.25-inch and 6-inch barrels. In 2025, a 2-inch and 3-inch barreled model made the catalog. Unlike the reintroduced King Cobra in .357, the barrels on the .22 models come with the iconic vent rib.

For this overview of the King Cobra 22 lineup, I chose the standard 4.25-inch barreled model as well as the snubnose 2-inch model. Their specifications are as follows:

• Caliber: .22 LR
• Capacity: 10
• Barrel Length: 2.0 inches/4.25 inches
• Overall Length: 7.25 inches/ 8.75 inches
• Height: 5.5 inches
• Width: 1.75 inches (at the cylinder)
• Weight: 1 lb. 13.5 oz./2 lbs. 2.8 oz. (loaded)

When it comes to handguns, it is often easy to box them into a given category and assign performance values afterwards. Some handguns are meant for duty work, others for concealed carry, and others still for hunting and training. Small-framed revolvers chambered in .22 tend to cut across categories, and the King Cobra .22 is no exception. The 4.25- and 6-inch models are absolute candidates for small game hunting and plinking, while the 2-inch model is light enough for everyday carry if .22 rimfire is right for the shooter’s specific circumstances. These factors were in mind as I set out for the range to run them hard.

Every so often, I like to take my dedicated woods gun out and shoot for groups both offhand and off the bench at twenty-five yards to make sure the sights are on, and I still have a feel on the trigger. For years, an old and beat Ruger Single Six has been my woods gun. This year, the small and full-sized King Cobras joined the Six on the firing line before squirrel season to run the same accuracy drill.

For the accuracy test and much of the offhand work, I used the following ammunition:

• CCI Blazer 40 grain RNL
• CCI Mini Mag 36 grain hollow-point
• CCI Stinger 32-grain hollow-point
• Federal High Velocity Match 40 grain RNL
• Remington Viper 36-grain flat-point
• Winchester Western 36-grain hollow-point

On the face of it, the longer-barreled 4.25-inch Colt King Cobra should be the better shooter. Its red fiber optic front sight is sharper and more distant in relief to the rear sight, and that sight picture should make it a better shooter as less of the target is covered up by that front sight. It also had a steady, slightly muzzle-heavy balance, while the snub is more proportional.

As it happened, the 2-inch rivaled its bigger brother. In fact, the Federal HV load produced consistent groups that run just north of one inch. Most of the ammunition used consistently produced 2-2.5-inch groups at 25 yards from the bench. The Remington Viper round was the worst offender, with consistent groups between both revolvers at the three-inch mark. For social work, plinking, and small game work, any one of these loads gives more than the minimum. In terms of recoil and noise, the Viper and Stinger loads were louder than the other loads, but neither of these all-steel tanks quivered. There was absolutely no recoil.

I quantify shootability as a mix of ergonomic and shooting cues that tend to show up when you get off the bench and put quite a few rounds downrange off-hand at various distances. In all, I put three hundred rounds through each revolver, usually shooting them side by side at various targets as close as ten yards and as far as fifty.

Loading the King Cobra 22s is straightforward, but it can take a while. Like any Colt revolver, the cylinder release is pulled back and the cylinder rolled out to the left side. These snakes have plenty of strikes. Ten to be exact. Loading in ten of those little .22 LR cartridges can take a minute, going round by round. There are a few speedloader options available, but I made do with a pair of .22 caliber Quick-Strips when I remembered to pack them. Once loaded up, the cylinder is pushed back into the battery. Since the King Cobras have exposed hammer spurs, you can cock the hammer and pull the trigger for a lighter press. Alternatively, you can press the trigger all the way through to fire the revolver.

When it comes to shooting double-action/single-action revolvers, it can be easy to use the single-action shooting mode of cocking the hammer as a crutch to get over throwing shots with the longer and heavier pull of the trigger in double action, which cocks and releases the hammer in one stroke.

With the new generation of Colt revolvers, this dynamic is turned on its head. Old Colt revolvers tended to be prized for their light, crisp single-action trigger pull, but the double-action pull was very heavy and stacked heaviest at the break.

New Colts are engineered to sacrifice some of that single-action capability for a shorter and lighter double action. There is less of a difference, but the action is lighter and easier to pull overall. On my Lyman trigger scale, the snubbie King Cobra .22 breaks in single action at 3 lbs. 11 oz. The double-action pull is only 5 lbs. 11 oz. The 4.25-inch model came in at 4 lbs. 4 oz., and the double-action was two pounds heavier than that.

With triggers like these, I spent more time reloading than shooting because going through ten rounds proved too easy. The single-action trigger proved to be a useful tool as the ranges grew, since the trigger takes a hard touch to set off. But I had no issues hitting an eight-inch steel plate at fifty yards by pressing straight through and keeping the sights level as the trigger breaks at the end of their stack. Ordinarily, I am not a fan of rubber grips and fiber optic sights.

Rubber grips are overkill for a .22, and fiber optics are open to damage coming in and out of a safe, but both of these features added more than they subtracted. Although I favor a good pair of Badger or Altamont grips, the Hogue rubber grips are compact but hand-filling enough for a full firing grip. The fiber optic shows in stark relief both in dark shadow and the cloudless, relentless Louisiana sun. All things considered, the King Cobra 22 is squared away in the categories of accuracy and reliability.

Rimfire guns tend to favor some ammunition over others in terms of both accuracy and reliability. In a bid to improve reliability, most manufacturers use heavier springs so that the hammer will convincingly smack the primer of the rimfire cases. Colt seems to have gotten away with not doing that and gave us a good trigger as a result. Out of the six hundred rounds I have gone through both handguns so far, I have had no failures to fire.

Both revolvers took no cleaning in their initial run, and it showed after the first two hundred rounds in the unloading process. To get the empty cases out and new ammunition in, the cylinder is retracted in the usual fashion and the ejector rod pushed to kick the empties out. The rod is long enough to easily kick the cases out, and it was easy to do with thumb pressure. But as these revolvers got dirtier, a firm hit with the palm was needed. If anything, I was surprised, given how dirty .22 ammunition is, that I did not have to do it earlier. But after a good, sharp wrap, the chambers were empty and ready to take more ammo.

The new Colt King Cobra/Viper series is an entirely new design compared to the legacy model. As such, parts and accessories meant for the latter will not work for the former. But since its reintroduction in 2019, the King Cobra has had a healthy and growing number of extras.

In terms of speed reloading options, I mainly used some ten .22 LR Quick Strips I had on hand. Speedloaders from Five Star and Speedbeez are available and can speed up the reloading process quite a bit.

Galco is the standout maker of King Cobra holsters in terms of variety, but I have made a K-frame Bianchi Shadow II holster work for the 4.25-inch model. The King Cobra is stuck in the middle ground of being too big for a J-frame and just a hair small for K-frame holsters.

There is also a growing number of aftermarket grips to choose from, ranging from square butt target grips to boot grips. Altamont and Hogue own the market on the larger style grips, but Badger offers excellent grip setups for more discreet carry.

In 2025, Colt announced a line of optic mounting plates for their Python and Anaconda revolvers. Interestingly, if an optic is on the agenda, Allchin Gun Parts offers their STS optics mount for micro-red dot optics and red dot scopes.

READ MORE HERE: Full Review: Girsan Witness2311 Match X – Imported by EAA & Enjoyed By You

There are plenty of good .22 revolvers out there. They run the gamut from airweight snub-nosed models made for everyday carry to long-barreled single actions that can rival a rimfire rifle in the squirrel woods. But when you try to split the difference, the options become non-ideal. Colt saw an opening and went for it by chambering their small-framed King Cobra in .22 Long Rifle. If my time with these models is anything to judge by, the Colt King Cobra strikes a good balance of being compact yet shootable.

*** Buy and Sell on GunsAmerica! ***