Titanium Shhh: The SilencerCo Scythe-Ti

Although all well-made suppressors are useful, versatile tools, sometimes a model comes along that takes the concept to the next level. That’s the case with the SilencerCo Scythe-Ti, the model designed to launch the manufacturer’s premium line. This is the suppressor you should be considering, whether you prefer shooting from the bench or from a hunting blind. Here’s why.

Thank you for reading this post, don't forget to follow and signup for notifications!

As the name suggests, the Scythe-Ti is made from titanium—yes, really (more on that later). This suppressor is designed for rifles in calibers ranging from 223 Remington to 300 RUM, so you could say it’s versatile. To make things easier, SilencerCo ships the suppressor with both a 5/8×24 titanium direct thread mount and a .30-caliber aluminum Single-Port Anchor Brake. Of course, once you get your hands on it, you may end up wanting one for each of your rifles so you’re not constantly swapping it around.

The most obvious reason for utilizing titanium for a suppressor is weight. As the cliché goes, ounces become pounds when you’re supporting weight for extended periods (or simply shooting offhand). Aside from that, it’s an extremely strong metal with fantastic strength-to-weight ratios. It’s also highly resistant to corrosion and durable enough to outlast many other metals. Ever so often, you hear a naysayer claiming titanium can’t take the heat, but in reality, titanium is excellent at handling extreme heat. I mean, come on, do you really think SilencerCo would put out an inferior product? Absolutely not.

For those who really enjoy the gun geekery—that’d be me—here’s a brief walk into the weeds on titanium. SilencerCo used Grade 5 and Grade 9 titanium for the Scythe-Ti. Grade 5 is a commonly used alpha-beta titanium alloy with a stellar strength-to-weight ratio. It’s even resistant to corrosion caused by saltwater and some acids, which you have to admit is impressive. This grade is 90 percent titanium, 6 percent aluminum, and 4 percent vanadium. As for Grade 9, it’s considered superior to other titanium grades and offers great ductility. Interestingly, Grade 9 is used to make things like pacemakers. Combining the two grades makes good sense.

This is a multi-caliber suppressor created for superior sound suppression of .30-caliber rifles. What that means is it might be made with an eye—or ear, as the case may be—for quieting .30-cal, but it works well on a variety of others, too. This model is fully welded, meaning it isn’t user-serviceable, but that isn’t a bad thing (in fact, there are pros to that construction).

The Scythe-Ti measures 6.16 inches in length and weighs a scant 7.3 ounces. Diameter is 1.73 inches, which makes it narrower than the handguard on the rifle I put it on. It’s Type II Anodized with an oil finish for an additional layer of protection from wear and tear—as well as the elements—and that has the bonus of giving it a dull sheen that doesn’t reflect sunlight at inopportune moments. The suppressor is topped by a Single-Port Anchor Brake created to help mitigate felt recoil without adding bulk.

To my ears, the Scythe-Ti provides great sound suppression. But thanks to the team at SilencerCo, we do have a better way to explain sound reduction. According to the suppressor maker, the decibel average is as follows:

• 5.56 NATO: 129.5 decibels
• 300 BLK: 127.6 decibels
• 308 Win: 128.4 decibels
• 300 Win Mag: 132.9 decibels

Keep in mind that noise reduction depends on a variety of factors, such as barrel material and length, caliber, and what ammunition is being used. These results are just to give you a general idea of what to expect with the Scythe-Ti, not a promise of specific performance.

There are a few different options for mounting the SilencerCo Scythe-Ti to your rifle. On my AR-15, which has a Proof Research carbon fiber barrel in 223 Wylde, I’m using the direct thread option. That means all I had to do was remove my muzzle brake and screw the suppressor on. Pretty straightforward.

Side note: When you’re using direct thread mounting rather than utilizing a brake that serves as a mount, remember that means your threads will be exposed when you remove the suppressor. Either make sure you know where the muzzle brake is or get a thread cap for that gun. Don’t just leave the barrel threads exposed and unprotected.

This isn’t the first suppressor I’ve ever used—it isn’t even the fifteenth. I’m not sure how many I’ve used at this point. I immediately loved the reduced weight of the Scythe-Ti. That’s partly because my brain is remembering the way pistol suppressors add bulk and length to an otherwise compact design, and partly because hey, suppressors in general aren’t necessarily lightweight. The Scythe-Ti really is, though, and it makes you care a lot less about adding length to your barrel (and really, this one isn’t much length, either).

My suppressor is the standard gray, and there’s a part of my brain wishing it matched the rifle better—but then I do have a thing for standard black rifles. Colorful finishes have never been my thing. If you really want a black model, you can get it in black if you make your purchase through Silencer Shop. On the other hand, the gray makes it easy to visually distinguish it from other models.

You can definitely use this suppressor for long-range shooting, precision shooting, hunting—whatever you want. I like it for hunting because it provides reliable sound reduction while I’m chasing feral hogs. Unlike whitetail season, hunting hogs almost always means multiple shots fired. Sometimes it’s even a lot of shots when there’s a big sounder.

As for long-range shooting, the Single-Port Anchor Brake plays an important role in recoil reduction. That means muzzle rise is also reduced a bit, and that helps accuracy, follow-through, and follow-up shots. As someone who loves long-range—meaning anywhere from 500 yards to over a mile—I have to say this suppressor is awesome. Using a suppressor means you can hear your spotter far better, assuming you’re using one. It also gives you the ability to better hear that tell-tale ping of a bullet meeting steel. Big, huge pros to using a suppressor while you’re doing long-range shooting, and this titanium model is terrific.

So, does this titanium suppressor work well? It does, and I’d 10/10 recommend it to anyone looking for a quality rifle suppressor.

READ MORE HERE: Suppressor 101: A Cleaning Guide

This is a well-made suppressor that protects your hearing and the hearing of those around you while also cutting down felt recoil. If you’re a hunter, the Scythe-Ti makes it so you aren’t shooting up an area with noise. And if you’re at the range, it quiets things down enough to make the neighbors happy.

Please note this model isn’t full-auto rated. If you require that or just want the option, you should check out the Scythe-STM. That’s the stainless steel version, and it’s also awesome (I’ll fill you guys in on that one later). Something else to be aware of is that SilencerCo recommends you do not use lead bullets with their sealed suppressors, and really, who’s out there running lead bullets through their 223 Rem or 300 Win Mag? Not a hardship to avoid it.

This one just might be my favorite model ever from SilencerCo, and that’s saying something. Of course, they could come out with something even cooler. Time will tell. For now, give some love to the Scythe-Ti. It would make the perfect addition to your collection.

MSRP $1174

Check out the Scythe-Ti here.

If you want to really cut weight, get a Proof Research barrel, too.

*** Buy and Sell on GunsAmerica! ***