Enfield MkII: Better Than the MkI, I Guess By: Ian McCollum

0
11

[[{“value”:”

Thank you for reading this post, don't forget to follow and signup for notifications!

The Enfield MkI had only been in service for two years when the MkII was adopted in March 1882 to resolve some of its problems (and reduce its cost). At the same time, a new cartridge was adopted (the MkIII) with a heeled .477” bullet – also in hopes of resolving some o the problems with the Enfield revolver.

The Enfield used a selective ejection system that was intended to dump empty cases but retain unfired live cartridges. It was a bit finicky, with the live rounds often moving during the ejection process and jamming the system up. The larger heeled bullets were hoped to help stop that – and they were also thought to provide better accuracy in the gun’s Henry type rifling.

Simplifications to reduce cost of the gun included:Unchecked gripsSmooth holster guidesSimplified geometry on the lower frame and top strapSemicircular front sight

Finally, a number of mechanical changes were made. Small elements were added to the clockwork to prevent cylinder rotation when not firing, and to lock the trigger and hammer when the loading gate was open. A second side plate screw was added to ease disassembly, and the grip attachment redesigned to use the lanyard ring as a screw to hold them in place. A fatal accident with an Enfield led to design of a hammer block safety that was intended to be universally retrofitted to guns in service, but many of the guns already sent out to far corners of the planet were never returned for this work.

In total, 13,102 MkII Enfield revolvers were made between 1882 and 1885, plus one gun each in 1886 and 1887. In 1887, the Webley MkI revolver was adopted to replace it, presumably much to the relief of Ordnance officers across the Empire.

“}]]