If you’re looking to build or customize a rifle that looks and shoots exactly how you want it to, you’re not going to find a better gun than the AR-15.
Thank you for reading this post, don't forget to follow and signup for notifications!
With a seemingly endless supply of upgrades at your fingertips, modding or building your AR-15 from the ground up has never been easier.
For the most part, modding or building your AR-15 from the ground up is relatively simple and straightforward. And best of all, most of the tools needed for the job are probably lying around in your toolbox already.
And if this is your first time building an AR-15, make sure to take a look at our list of essential gunsmithing tools to see if you’ve got everything to get started.
Today, we’re going to look at…
- Vise blocks
- Pin punches
- Wrenches
- Tool kits
- Screw kits
Now that we’ve got that out of the way let’s take a look at some of the best AR-15 build tools designed to make gunsmithing easy and convenient.
Essential AR-15 Build Tools
1. Brownells Upper & Lower Vise Blocks
When assembling your AR-15, it’s important that you use vise blocks to clamp your receiver halves together without damaging or distorting your upper and lower receivers.
There are a number of different vise blocks available on the market, but the advantage of going with Brownells is that you’re able to get two high-quality products without having to pay an exorbitant amount of money.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
Both blocks are made from a heavy-duty urethane plastic that’s strong enough to withstand pressure from your bench vise while also keeping your upper and lower receiver protected from damage.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
And if you need both, you can grab the set for a pretty good price!
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
What do you think about the vise blocks? Rate them below.
2. Magpul BEV Block
Magpul took the standard block and improved it.
The BEV Block locks your upper to it with a pin through the pivot hole and comes with steel lugs that enable you to work on barrel nuts and flash hiders without flexing the receiver.
This tool allows you to conduct a series of important building steps for your upper, and it’s more diverse than clamshell-styled blocks.
Some types of AR uppers don’t fit perfectly into these molds, but the BEV Block will accommodate them fine.
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
In addition, the BEV Block doesn’t require you to remove your optic to complete jobs once your gun is already built. Finally, it also comes with an o-ring post to mate with your BCG for extra stability.
3. Real Avid Pivot Pin Tool
A takedown pin tool is built from heavy-duty plastic that’s strong enough to remove takedown pins without damaging your gun.
It’s also helpful for installing your magazine catch without marring or scuffing up your lower receiver’s metal. How so? It lets you push the mag release back far enough so that you’re able to install your mag catch without any issues.
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
4. Magpul Armorer’s Wrench
The Magpul Armorer’s Wrench is for when you want the Cadillac of spanners.
This sturdy wrench is designed to maximize grip and comfort. Just like other armorer’s wrenches, it works with both pin and stock-style barrel nuts and is compatible with standard-sized muzzle suppressors. It also is able to tightly grasp castle nuts without causing damage to the nut.
Oh, and you can also open bottle caps with it, which is great for cracking open a cold one after you finish working on your build.
This wrench is created to give a firm grip on the nut in three places, making it easier to exercise control over the nut without causing any damage.
Prices accurate at time of writing
59
at Brownells
-
Brownells (See Price)
- Magpul (See Price)
- Rainier Arms (See Price)
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
5. Brownells Armorer’s Wrench
If you’re not about living that minimalist lifestyle and want the Swiss Army Knife of wrenches, the AR-15 Armorer’s Wrench is right up your alley.
This heavy-duty tool is strong enough to withstand heavy use without breaking or bending but is delicate enough to protect your gun from scuffs and scratches while handling stock and pin-style barrel nuts.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
Plus, it makes a great lightweight tool to carry around in your range bag. Curious about other wrenches? We have more recommendations in our Best Armorer’s Wrench article.
6. Wheeler Engineering AR-15 Armorer’s Essential Kit
If you don’t want to spend nearly $300 on gunsmithing tools, but you still want to make sure that you’ve got everything you need to start your AR-15 build, Wheeler’s Essential Kit might be right for you.
This tool set is perfect for beginners and for people who’ve got some gunsmithing tools lying around already. It comes with all of the heavy-duty instruments that you need to build your AR-15 or modify the one you’ve already got.
Each kit includes the following items:
- An AR-15 combo tool for different types of bolts
- A torque wrench
- Vise blocks for your upper and lower receivers
- Pivot and roll pin installation tools
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
Additionally, the toolset also comes with a durable bag to carry around your tools and keep them protected from the elements.
And while the Essential Kit isn’t quite as comprehensive as the Ultra toolset, its tools are made with the same heavy-duty design that’s built for longevity and maximum usage.
7. Multitasker Twist AR-15 Tool
The Multitasker Twist AR-15 Tool is a screwdriver multi-tool designed to help make maintenance and optics adjustments quick and easy.
This compact tool is the size of a pen, making it easy to carry around in your pocket or in your range back.
Prices accurate at time of writing
50
at Brownells
-
Brownells (See Price)
- Rainier Arms (See Price)
Prices accurate at time of writing
-
25% off all OAKLEY products – OAKLEY25
Copied!
Visit Merchant
Features include:
- 10 different bit heads
- Adjuster for your Aimpoint sight
- 3/32” pin punch
- Pocket clip
While not a necessity for building your AR-15, this tool certainly is handy if you’re trying to clean or adjust sights.
Final Thoughts
Whelp, that’s our list of best AR-15 build tools to help you get started with your rifle.
As you can see, building or modding your AR-15 is a complex process. For this reason, it’s always a good idea to come up with a tool checklist before starting your build.
That way, you don’t have to worry about stopping midway just because you forgot to buy a pin punch set or something.
What’s your go-to tool? Let us know in the comments below. If you’d like to learn more about building your first AR-15, Glock, or a variety of other popular guns, make sure to check out our build guides to learn a little bit about gunsmithing.
